Glassing the deck

I will add some more pictures here after glassing the second hull. These are the things I learned.

It was impossible to do a large glassing job and keep the glass against the inside radius creating air voids through out the joints. So unlike the picture below where I tried to minimize the pieces of glass to do the job, I am going to try something different for the starboard hull.glassing_measuring_cloth glassing_fwd_deck

  1. Start by fiberglassing the beam boxes first
  2. Then the center deck and up the cabin house
  3. Followed by bow
  4. Then the cabin house top and side
  5. The aft deck and transom