![\"airbubble\"](\"http:\/\/saideira.net\/wp-content\/uploads\/2014\/11\/airbubble.jpg\")
<\/a><\/p>\n<\/p>\n
Here is a better picture of how the biaxial glass lays down and the filling required to sand it smooth. I wonder if adding a very light woven cloth as the top layer would make fairing easier.<\/p>\n
At this point I decided to sand all of the interior surfaces to 80 grit to simplify bonding the bulkheads. At first I thought I would only sand where needed, but decided to just prep the whole interior surface.<\/p>\n Bulkheads cut and in place<\/p>\n Ooops! this what happens when you read a 3 when it is supposed to be an 8. Bulkhead #4 off by 50mm in height. Notice the low shear corner…<\/p>\n I spent the last couple weekends moving the boat and tools into the “Boat Barn.” I just started working towards installing the bulkheads and took some more notes and pictures. Here is a picture of why you want to fill all the staple holes. You can see an air bubble that made its way to … Continue reading Winter building space<\/span> <\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"