![\"DSCN2302\"](\"http:\/\/saideira.net\/wp-content\/uploads\/2015\/07\/DSCN2302.jpg\")
<\/a><\/p>\n <\/p>\n And here is the final product…<\/p>\n <\/p>\n <\/p>\n <\/p>\n","protected":false},"excerpt":{"rendered":" Building is a rudder is time consuming but well within our capabilities. It all starts by cutting the plywood blanks and getting a machine shop to build you the rudder post and tiller assembly. They also took care of making my delrin bearings. Now we go ahead and piece it together And shape it to … Continue reading The Rudder<\/span> <\/a><\/p>\n<\/a>Now we go ahead and piece it together<\/p>\n<\/a>And shape it to the prescribed foil shape. I used a belt sander to get it to shape<\/p>\n<\/a><\/p>\n<\/a><\/a>Once you are happy with the shape, time to glass it over. I did the leading edge first. To make sure you can a smooth curve on the bottom cut the glass strips 45 degrees tot he bias<\/p>\n<\/a><\/a><\/a>Once you glass the edges. adding glass to the flats is easy. I decided to glass with three 10 oz layers the whole blade<\/p>\n<\/a><\/p>\n<\/a><\/p>\n